Edit Design Criteria

Road Type Name: Unique identifier for this Road Type. Changing this
value will create a new Road Type. Leaving this value unchanged will
overwrite the existing Road Type.
Road Description: Description for this Road Type
Right of Way Width: Enter the width of the Road's Right-of-Way (in feet)
Road Width (B.O.C.): Enter the distance between back of curb for
this Road Type (in feet)

Curb Width: Enter the distance from back of curb to face of curb (in feet)

Gutter Width: Enter the distance from the face of curb to the edge of pavement (in feet)

Sidewalk Width: Enter the width of the sidewalk (in feet)

Walk Distance from BOC: Enter the distance from the back of curb
to the edge of the sidewalk (in feet)
Walk on Left Side of street: Check this box to draw sidewalk
on the left side of the street (left as seen looking up-station)

Walk on Right Side of street: Check this box to draw sidewalk
on the right side of the street (right as seen looking up-station)

Intersection Radius @ BOC: Enter the back of curb radius at intersections (in feet)

Minimum Centerline Radius: Enter the minimum centerline radius (in feet).
This value will be check when attempting to Draw Roadway Linework .
If minimum radius is not met, user will be alerted.

Minimum Centerline Tangent Lenght: Enter the minimum centerline
tangent length (in feet). This is the distance between the end of one curve
and the start of the next curve. This value will be check when attempting to

Draw Roadway Linework . If minimum length is not met, user will be alerted.

Validate Input: Clicking this button will check all input. Any invalid data
will be flagged and the user will be prompted to correct it.
Validating the input will enable the OK button.

OK: Click this button to save the Design Criteria.

Cancel: Click this button to close the dialog box without saving the changes.

Help: Click this button to display this Help File.